1 x SE325. This is a superb quality, modern style, self contained 'Racing' Pedal Box Assembly - One of our many Special Equipment items.

Sizes of pedal box assembly is approx. : 28cm wide x 28cm high x 12cm deep.

This is a top quality, floor mounted  pedal box with 3 rear mounted  master cylinders and an adjustable balance bar for front to rear brake bias. These cylinders are designed to have remote reservoirs fitted for ease of servicing, so on an XK the standard steel type (reservoir) cannister may simply be situated at the top of the engine side bulkhead panel, to look like standard.

A superior, modern style upgrade suitable for custom fitting into an XK120, XK140 or XK150, as it bolts to the floor.  As you can see the pedals are also bolt-on, so  each one offers an individual 3-position transverse adjustment. It features drop-forged, clutch and brake pedals and also an accelerator with adjustable cable throttle system, if you wish to simplify rather than using standard rods.

Featuring Twin brake master cylinders for safety (split system), adjustable for front / rear bias braking and a third for hydraulic adaption of the clutch master cylinder, which is similar size/design to the standard XK150 (0.625") clutch master. The cylinders may be simply swapped around if you wish to experiment with pedal feel (for our additional cylinder options SEE : SE620 & SE621). Clutch pedal features an adjustable pedal stop.

NOTE: When fitting to an XK120 we do manufacture a bolt-on, Bulkhead Extension Panel SE326 to help provide the maximum legroom by providing an extended, vertical bulkhead panel, allowing the pedal box to be positioned as far forward as possible. The fitting of this kit with plate can create up to 6 inches of extra leg-room for taller drivers.

NOTE: Steel reinforcement should be fabricated below the box to prevent flexing of floorpan.

Contents of this kit;
3 x In-line Master Cylinders ( 0.625", 0.70" and  0.75" bore. NOTE : To arrange for best feel )

1 x Adjustable balance bar assembly for brake.

1 x Actuation cable for the throttle pedal.

Pedal box design may vary from photo.

Struggling for extra leg room in an XK? Check out our tilt-back bucket seats.

NOTE : This is a racing modification, so do please check it is legal in any race series you wish to compete in or is in fact road legal in your home Country's regulations before purchasing.