1 x  PAIR. New Jaguar XK20 Rear Wheel Adaptor Hubs designed  to convert an XK120 ENV AXLE to take Jaguar standard spline, wire wheels. 1 x 4474R & 1 x 4474L

THESE ARE BOLT-ON ADAPTORS, created because the ENV hub and halfshaft were a one-piece unit (so cannot be swapped out). They will slightly WIDEN the rear track by the flange thickness of 10mm per side (less than 1" overall ) but you may retain the standard ENV brake drums.

NOTE: These are designed for REAR HUBS ONLY, and DO NOT PHYSICALLY FIT ONTO FRONT XK HUBS. This would be an unacceptable engineering concept and they are not manufactured for the turning forces involved on the steered wheels, so be advised that mis-using these adaptors will invalidate your vehicles insurance in the case of an accident. They are shown fitted onto an ENV hub / halfshaft as I was once firmly informed by a customer that "These do not exist!"

Until these were manufactured the only way of fitting wire wheels to early cars was by changing the Axle for a later 2HA or 4HA Salisbury unit and fitting the correct Jaguar matching hubs.

Handed for right and left side so that the threads rotate correctly and cannot come undone in use (as inertia is always tightening them!)

NOTE : Front wire wheel hubs are  available to convert to splined wheels, but the front drums must be changed as they need to be the dished type to not alter the turning circle (and PCD changes). Alternatively, why not just fit our great disc brake conversion which includes new hubs in the complete kit? SEE : SE305